is a boron free sodium soap containing some calcium, it has a middle fat content and a high melting point. The lubricant is very pressure and temperature stable and can be used on low, medium and high carbon wires. This product is best used on mechanically descaled wire in the first passes and is ideal for substituting calcium soaps giving a clean finish. C 612 can be used with pressure dies to spend highest performance.
is a borax free sodium lubricant with a low melting point. D 80 X/B can be used on low medium and high carbon wires, which require a clean surface after annealing. It can be used in all dies on pickled, annealed, mechanical descaled or salt coated wires.
are boron free sodium soaps with a high fat content and low melting point for well cooled and low to very high speed machines. SL 808 and V 60 B are best used on high tensile wire either pickled and phosphated or mechanically descaled. F 80 B is best for low to high carbon wire with low residuals for afterwards processing.
is a boron free sodium soap with a medium softening point. SL 920 is special designed for high tensile wire. It is usable for all passes on both acid cleaned and mechanical descaled wire with salt coated surface.
is a boron free sodium soap with a high softening point. SL 2020 B / SL 7010 BXL is special designed for high tensile wire and low carbon wire at very high speed. It is usable for all passes on both acid cleaned and mechanical descaled wire with salt coated surface.
is a boron free sodium soap with a high softening point. SL 2050 is special designed for high tensile wire at high speed. It is usable for all passes on both acid cleaned wire with salt coated and acid cleaned with phosphate and salt coated.
is a low dust high strength sodium lubricant free from borax and inorganic fillers designed for wire drawing of low up to high carbon wire with a diameter up to 0.2 mm. It serves highest drawing speed. As pre-treatment the wire could be pickled (phosphated), limed or coated with carrier. The coating of TRAXIT V 15 SEB is very low and could be removed with hot water.
is a boron free sodium dry lube with a very high fat content.
V 15 SEC is designed for pre- and fine wire redrawing of low to high carbon and galvanized wire. In the same way it is usable for the redrawing of none galvanized wire with a clean finish. It can be used for the polishing dry draft or for the calibration so that the wire gets a clean surface. It builds a uniform dull covering for phosphate coated wire.
Prinzenstr. 46-50 | 58332 Schwelm - GERMANY
Tel +49 (0) 2336 – 919 100 | Fax +49 (0) 2336 – 919 101